Description
Yamaha 40 HP short shaft F40 FETS (including remote control, gauge and propeller)
Limited availability
Due to limited deliveries in 2024, it is wise to buy / reserve this engine early.
Description
New Yamaha 40 HP with extra high discount.
Engine is still in box. Includes 3 year manufacturer’s warranty.
Latest model 2024 with fuel injection, power trim, trolling function and electric start.
Engine comes with the latest type 703 remote control, new type digital LAN speed/trim gauge and propeller.
Of course, all cabling and the 4 engine mounting bolts are included.
Everything new in boxes.
Technical data
Brand: Yamaha
Type: F40 FETS (short shaft)
Construction year: New
Starting system: Electric start
Electric trim: Yes
Fuel system: Electric fuel injection
Amount of cilinders: 3
Cylinder capacity: 747cc
Weight: 98 KG
Shaft length: Short shaft (S)
Price
Recommended retail price of a 2024 Yamaha F40 FETS: $6000
Kit A consisting of 703 side switch box, digital tachometer / trim gauge: $300,-
Propeller : $115,-
Total: $6415
Now for $5.700 including Kit A and propeller.
Options
Option Added cost
Built-in remote control (flushmount) + Ignition lock panel + Flushmount engine cable $ 325,-
Built on top remote control (topmount) + Ignition lock panel + Topmount engine cable $270,-
Speed fuel gauge $520,-
Speed sensor $63,-
6YC multifunction gauge $490,- Offer
CL5 display $705,-
Anti-theft system (Y-COP immobilizer kit) $495,-
Yamaha 25 litre fueltank $85,-
Quicksilver fuel filter / water separator $50,-
Steady engine bolt lock (SCM approved) $79,-
Gas/throttle cables Based on length
Assembly
Additional assembly cost $350.
Additional assembly cost in bun $500.
Additional charge for installation of hydraulic steering $175.
Only hanging the engine on your boat $75 (connect everything yourself).
Only hanging the engine in the bun of your boat $150 (connect everything yourself).
The assembly costs are calculated per engine.
The assembly is carried out in our workshop.
If necessary, our engines can also be installed at our fellow dealer.
Hydraulic steering
Engines up to 80 HP:
Additional charge hydraulic steering $500,- (only in combination with the purchase of an engine).
Type: Mavimare GF90BT for enginesup to 80 HP.
Engines up to 150 HP:
Additional charge hydraulic steering $600,- (only in combination with the purchase of an engine).
Type: Mavimare GF150BRT for engines up to 150 HP.
Please note! These hydraulic steering systems can only be supplied at this price if it is purchased at the same time with an engine.
It is not possible to have the hydraulic steering system delivered afterwards for this amount.
Propeller service
When you purchase this engine you will receive a propeller that we think is suitable for your boat.
If this size propeller is not suitable for your boat afterwards, you can exchange it for a new one free of charge (provided there is no damage to the old propeller).
It is very important that you sail with the correct propeller because the engine must run at full power between 5500 and 6100 rpm. The choice of propeller therefore depends on the weight of your boat, what type of boat it is and how you will use your boat.
For example, if you are going to use your boat for water skiing, we recommend installing a propeller with a slightly smaller pitch so that the boat accelerates better.
We can supply the most common propellers for this engine from stock.
Delivery
Delivered on location throughout the country for an extra $500.
The engines are delivered and unloaded by our own employees so that you can be sure that the engine will be delivered to you undamaged.
Fitting the engine yourself
If you’re planning on fitting the engine yourself we can always give you very clear instructions on how to do so.
The following points will be discussed:
– The correct way of drilling the holes in the shaft (with new boats).
– Sealing the engine with the right sealant to prevent leakage and rotting of the mirror.
– Hanging the engine at the correct height.
– Connecting the cabling to the remote control and gauges.
– Connecting to the battery (possibly via main switch).
– Discussing which propeller you need for the best performance. (we often take several sizes of propellers with us so that we can determine on site which one you need)
– Explanation of how to install and correctly adjust the throttle/shift cables.
– Explanation of how to use a new engine.
– Explanation of the manufacturer’s warranty.
If you need a mobile crane to install the engine, you can borrow it from us for free with a deposit of 400 dollars.
Collecting / viewing
To pick up or view the engine, always make an appointment.
It is also possible to pick up or view the engine on Sunday or in the evening.
To make an appointment call:
Reviews
There are no reviews yet.